January 10, 2017Reply to this and tell us about yourself and your PT.
Forums : General Discussions : New members (1027 Views)
Subscribers : QuicksilverDon
January 26, 2017I need help with my pt cruiser. I am going to copy paste info. I need someone to help me.
: Pwr Windows/Blower Fan/Back-up lights/Rear Window Defogger/Air Bag Light
Found my problem... PDC Fuse 3 feeds through C106 connector under dash..then to C1 connector (ign switch run position)...then to interior fuse block Fuse 5 (air bag run) Fuse 6 (back up lights/rear window defogger) Fuse 7 (HVAC blower fan) and to CKT BKR 2 (power windows).. all fuses were good... Problem was pin 21 on connector C106... wire going into and out of the connector was blackened (not crispy) and there was some signs of melting gray material on downside of connector related to pin 21 wire. Pulled connector apart and found terminals corroded.. scraped clean and applied some dielectric grease to it .. put together and pulled apart a couple of time and then put it together and it works.. May have to keep an eye on it and also will see about replacing pin terminals or taking that wire out of the connector and splicing it.. then to determine what was pulling enough current to blacken the wire...not sure how this site works. My email is Smith Sarah2010@all.com. please contact me asap. Thx.
January 26, 2017I can`t figure what your problem is from what you wrote.
What doesn`t work?
What year is your PT?
I`m guessing an `06 or later since you mention PDC.